by Sam Tamborello | Nov 11, 2026 | Ask TamboWatches, Tambo's Tips
If you just bought an Omega Seamaster—whether it’s a classic “Bond” 2531.80, a midsize 2551.80, or an “Electric Blue” 2255.80—sizing the bracelet looks simple enough on paper. Most people grab an inexpensive blue plastic pin pusher...
by Sam Tamborello | Nov 10, 2026 | Ask TamboWatches, Tambo's Tips
If you own an Omega Seamaster Diver 300M—a classic Bond 2531.80, a 2254.50, or a modern ceramic Co-Axial—you’re probably familiar with one of the most common complaints about the watch. The bezel can be hard to grip. Over time, it can also become stiff, gritty, or...
by Sam Tamborello | Nov 10, 2026 | Ask TamboWatches, Tambo's Tips
Look at Omega’s specifications and you’ll find a straightforward number: the modern Speedmaster Professional Moonwatch is rated for 50 meters (5 bar / 167 feet), while the classic Speedmaster Reduced is rated for 30 meters (3 bar / 100 feet). Look on watch forums or...
by Sam Tamborello | Oct 30, 2026 | Ask TamboWatches, Tambo's Tips
A customer recently called me about an Omega he had just bought online. “Hey, I picked up a vintage Seamaster 300. I wanted to see about sending it in to have the movement serviced and gone through.” I told him, “Send me detailed macro photos of the dial, case...
by Sam Tamborello | Oct 29, 2026 | Ask TamboWatches, Tambo's Tips
If your Omega Speedmaster chronograph stops short of or resets past the 12 o’clock mark, don’t panic. And don’t keep winding it, thinking it needs more power to reset. Ninety percent of the time, an off-center chronograph hand is caused by a loose hand tube slipping...
by Sam Tamborello | Aug 17, 2026 | Ask TamboWatches, Tambo's Tips
Why “Polished” Isn’t a Bad Word There’s a rule floating around the watch world about Omega watch polishing that gets repeated like gospel. Five minutes on any forum and you’ll see it, some guy who’s never held the watch in question...
Watches